the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2015 Toyota Tundra Pro, Remote Start


Post ReplyPost New Topic
< Prev Topic Next Topic >
monty_77 
Copper - Posts: 491
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 15, 2009
Location: North Dakota, United States
Posted: February 05, 2015 at 10:10 PM / IP Logged  
Has anyone put a remote start in one of this yet?
Looking at wire comparison in directwire it looks the same as a 2014 tundra
Was just wondering if the bypass for the 2014 would work.
idatalink or xpresskit don't show anything for the 2015 yet,
Any help would be appreciated
Thanks
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 06, 2015 at 8:27 AM / IP Logged  
the ones that i have seen has a G key. Later this year I would suspect the changeover to H keys. Ask the customer to take a picture of the key
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
manahawkinrob 
Copper - Posts: 58
Copper spacespace
Joined: February 18, 2008
Location: New Jersey, United States
Posted: February 06, 2015 at 9:34 AM / IP Logged  
I have a 2015 Tundra Limited. It has a G key. I installed the factory remote start unit, but the instructions given were labeled 2014- so I would say the truck is the same as 2014.
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 06, 2015 at 10:28 AM / IP Logged  
Quote for the worst case scenario. Say they might loose a key.
This vehicle has 5 wires at the ignition, a SIL data connection, 2 can Hi/Low and immobilizer Data. Use the idatalink as the TL-5 works phenomenal on late model toyotas.If the idatalink doesn't handle the immobilizer, just disconnect that single wire and do a key wrap.
Should work though. since it's still G key, not to mention it looks like a carry-over from 2014.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
dasbogie 
Silver - Posts: 514
Silver spacespace
Joined: September 30, 2006
Location: Pennsylvania, United States
Posted: February 07, 2015 at 6:54 AM / IP Logged  
As long as it's a G key, it's the same as the 14. I just did a viper and flcan combo in a 15 tundra. All the wiring matched up and the bypass programmed just fine. Worked great.
Advanced
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: February 07, 2015 at 7:00 AM / IP Logged  
I agree with Tedmond.
I did a 2015, and the wiring was all identical to the 2014. I think I used a Flashlogic FLTB1 for the bypass.
As Tedmond said, either ask your customer for a picture of the ignition key, or ask him what letter is stamped on the blade.
I'll gamble that it'll continue to be a G key for the entire 2015 model year, but I could be entirely wrong and they could change over to the H key without notice.
By the way, this truck does not come with a valet key.
Also note that the styling has been refreshed inside and out, and the radio is different now.
monty_77 
Copper - Posts: 491
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 15, 2009
Location: North Dakota, United States
Posted: February 07, 2015 at 9:25 AM / IP Logged  
Ok thank, i will get a chance to look at key on Monday
As always great responses
monty_77 
Copper - Posts: 491
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 15, 2009
Location: North Dakota, United States
Posted: February 14, 2015 at 9:27 PM / IP Logged  
Yes had the G key

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, April 26, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer