the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

neons to alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
Sebastian018 
Silver - Posts: 364
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 01, 2002
Location: United States
Posted: May 22, 2003 at 10:47 AM / IP Logged  
I have a set of undercar neons that want to hook up to my alarm so that when i push a button on the remote the neons will turn on and then off and how do i connect the relay/
KBToys 
Copper - Posts: 74
Copper spacespace
Joined: November 21, 2002
Location: United States
Posted: May 22, 2003 at 12:45 PM / IP Logged  
86 = aux wire on alarm
87, 85 = constant 12volt
30 = neon lights
87a = not used
I think that is how you hook it up. Hopefully someone will reply to verify. I hooked up my strobes to do the samething.
Sebastian018 
Silver - Posts: 364
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 01, 2002
Location: United States
Posted: May 22, 2003 at 1:43 PM / IP Logged  
Ok, I Hope Someone reply to verify.
thanks anyway
nighthawk2k 
Copper - Posts: 116
Copper spacespace
Joined: June 02, 2003
Location: United States
Posted: June 14, 2003 at 8:30 AM / IP Logged  
Best thing to do is to pickup a DEI 545T Nite Light system and interface it to turn on the neon's.
Tommy
-Clifford/Directed/Alpine-Audio & Security-
New York Installerneons to alarm -- posted image.
philaf 
Copper - Posts: 93
Copper spacespace
Joined: April 14, 2003
Location: United States
Posted: June 28, 2003 at 9:42 PM / IP Logged  
or build the latched relay setup on this site... doing it like kbtoys said will only turn on lights while holding button down, as soon as you let go, would turn off
audiophyle247 
Member - Posts: 12
Member spacespace
Joined: November 14, 2002
Location: United States
Posted: July 18, 2003 at 4:23 PM / IP Logged  
Why not run a relay off of the alarms Parking light wire. Let the signal that blinks your parking lights, switch the relay on & off. Too simple? I thought I'd put in my 2 cents.
hmouta 
Member - Posts: 29
Member spacespace
Joined: July 12, 2003
Posted: August 17, 2003 at 2:37 PM / IP Logged  
how do u determine the remote button sequencing then?  my clifford ag4 alarm has about 6 unassigned channels, about 10 being used by alarm. nighhawk where in ny r u. do u have a shop?
nighthawk2k 
Copper - Posts: 116
Copper spacespace
Joined: June 02, 2003
Location: United States
Posted: August 18, 2003 at 12:55 PM / IP Logged  
i work in a shop. i'm in nassau county on long island.
Tommy
-Clifford/Directed/Alpine-Audio & Security-
New York Installerneons to alarm -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer