spacer spacer spacer spacer

2014 Ram w/Factory Alpine System

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: February 12, 2015
Location: Florida, United States
Posted: February 12, 2015 at 9:00 AM / IP Logged  

Have a 2014 Ram 2500 w/ factory Alpine system. Wanting to add LOC for an aftermarket amlifier, looking for the wire specs on the factory amp. Also would it be better to tap LOC on the input or output side of the factory sub amp?

auto enhancers 
Copper - Posts: 203
Copper spacespace
Joined: April 09, 2012
Location: Indiana, United States
Posted: February 12, 2015 at 9:30 AM / IP Logged  
before amp is fixed level outputs after the amp you are limited by the amps crossovers and eq, this system will lower the bass output at higher volumes, it would be best to use an RTA to see what signal will be the best for what you are trying to accomplish.
Member - Posts: 30
Member spacespace
Joined: January 29, 2015
Location: Texas, United States
Posted: February 12, 2015 at 1:21 PM / IP Logged  
tag the output of the factory sub if you are adding subwoofer amplifier.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Saturday, February 24, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer