05 Caravan Remote Start w/Dball2, Avital 4103

hi, Im installing , an avital 4103 remote start with a dball2 bypass on the xpresskit instructions (intallation type 1) ,i'm a bit confused with the ignition input + is that the pink heavy wire from the 6 pin connector ? or is it one of the status output wires or is this a typo error? also neutral safety has to be used or grounded in order for this unit to work? I have most of the wires hooked up but did not work ( im thinking because the neutral safety was not hooked up). Im using the d2d option . thanks for all the help.ch

If you are going D2D between the Avital and the DB-ALL2, all of the dashed Blue lines are handled by the

D2D connection.  That would mean that the 4103 thick Pink would go to the Caravan's Pink/White Ignition1wire at the ignition switch connector but the Pink (+) Ignition at the DB-ALL2 would be made via D2D.

Assuming that your van has an automatic transmission, the 4103's Neutral Safety wire would go to Chassis

Ground. 

Soldering is fun!

Ok , so I guessed it right , just wanted to make sure.Thanks.ch