the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2009 Corolla Japanese Made.


Post ReplyPost New Topic
< Prev Topic Next Topic >
cherxiong 
Copper - Posts: 164
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: March 09, 2015
Location: Alaska, United States
Posted: March 10, 2015 at 1:26 PM / IP Logged Link to Post Post Reply Quote cherxiong
Please help me identify the ignition switch wire.
I have 8 pin plug.
Pin 1 has a white wire,
Pin 2 has two black wires,
Pin 3 has a yellow wire,
Pin 4 is emptied,
Pin 5 has 2 white wires.
Pin 6 has a white wire,
pin 7 has a Gray wire,
Pin 8 is emptied.
Thanks in advance.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 10, 2015 at 1:39 PM / IP Logged Link to Post Post Reply Quote howie ll
TEST
With first ACC, then IGN, then crank.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 10, 2015 at 1:44 PM / IP Logged Link to Post Post Reply Quote howie ll
You've got 2 X IGN., 2 X start, ACC and at least 1 12V+ constant input.
cherxiong 
Copper - Posts: 164
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: March 09, 2015
Location: Alaska, United States
Posted: March 10, 2015 at 3:18 PM / IP Logged Link to Post Post Reply Quote cherxiong
Thank you so much Howie II
cherxiong 
Copper - Posts: 164
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: March 09, 2015
Location: Alaska, United States
Posted: March 10, 2015 at 5:59 PM / IP Logged Link to Post Post Reply Quote cherxiong
Howeii. Is it possible to have two 12DCV constant. Two pin always stay at 12DCV when I tested.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 10, 2015 at 6:40 PM / IP Logged Link to Post Post Reply Quote howie ll
Yes, nearly always on Toyotas. Sorry, I should have mentioned that above.
cherxiong 
Copper - Posts: 164
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: March 09, 2015
Location: Alaska, United States
Posted: March 11, 2015 at 9:07 AM / IP Logged Link to Post Post Reply Quote cherxiong
Thanks again for confirming, your time, and your help. I have more confidence now.
:))))
cherxiong 
Copper - Posts: 164
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: March 09, 2015
Location: Alaska, United States
Posted: March 12, 2015 at 11:14 AM / IP Logged Link to Post Post Reply Quote cherxiong
Howeii, sorry to bother you again. I am trying to hook up my remote car starter. My question is why do I have two start wires in one pin (Pin 5)? How do I know which wire to connect my starter wire out put from the remote starter. Also the Accessory also has two wires. Howeii , please advise.
My remote starter:
Remote Start, 8-pin connector
1. RED / BLACK (+) 12VDC CONSTANT INPUT for ACC and starter relays
2. PINK/BLACK (+) FLEX RELAY INPUT 87A key side (if required) of FLEX RELAY
3. PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT
4. RED (+) 12VDC CONSTANT INPUT for ignition 1 relay
5. VIOLET (+) STARTER OUTPUT
6. ORANGE (+) ACCESSORY OUTPUT
7. RED / WHITE (+) 12VDC CONSTANT INPUT for ignition 2 and flex relays
8. PINK (+) IGNITION 1 INPUT/OUTPUT
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 12, 2015 at 11:21 AM / IP Logged Link to Post Post Reply Quote howie ll
Hook the violet to either if they share a pin.
You should have 2 IGN. wires pink to one, pink/white to the other.
Orange to one ACC then H2 orange (thin wire) to relay 85
Relay 86 and 87 to 20 amp fused constant.
30 to second ACC. Diode 1N4004 across 85 and 86, band to 86.
Pink/black not used.
cherxiong 
Copper - Posts: 164
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: March 09, 2015
Location: Alaska, United States
Posted: March 12, 2015 at 11:43 AM / IP Logged Link to Post Post Reply Quote cherxiong
Thanks.
How about these two wires below here. Should I hook them to the constant wires of the key switch? or "Do Not Use" like the Pink/Black you've mentioned
1. RED / BLACK (+) 12VDC CONSTANT INPUT for ACC and starter relays
7. RED / WHITE (+) 12VDC CONSTANT INPUT for ignition 2 and flex relays
Page of 19

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, June 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer