Directed 535T in 2014 Ram

I am trying to install a Directed 535T in a 2014 Ram 1500 Express. It's a 2 door, with factory express down. It will be triggered by a Viper 4706V remote start. I am having difficulty with this because it appears to have a door module for each door and be a CANBUS system. Just don't want to screw something in the system. I plan to trigger them down with the orange wire from the Viper remote start, but also need help knowing which wire to use to trigger them up. Any help would be appreciated.

Orange from Viper is constant triggered UP. Use one of the aux wires for down. Wire directly to the motors in each door. Most modern cars run data from a body control to the door module which then converts the data to standard motor wiring, NEG at rest the one side goes POS on actuation.

BTW, sorry from switch to body control to door module. And it's CAN and LIN in the door. My driver door switch panel has 4 X one touch up down window switches plus mirror, 4 wires coming from the plug.

Thanks Howie. So would I, in each door, run the wires so that one side of the module goes to the switch and the other to the motor, essentially bypassing the door control modules?

Yes go directly to motors.