Python remote start error after new battery

Home / the12volt's Install Bay / Car Security and Convenience / Python remote start error after new battery

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mohpro

Member - Posts: 38

Joined: October 30, 2014

Location: Maine, United States

Posted: September 23, 2015 at 8:42 PM / IP Logged

I put a new battery in my car. After soing so, my car would not start with my python 4206 remote start. Using the shut down diagnostics, i get 4 LED flashes, which is "transmittor shut down or optional push button". It was working fine before I put the new battery in. Can anyone help guide me what to check, or how to fix the problem?

Back to Top

mohpro

Member - Posts: 38

Joined: October 30, 2014

Location: Maine, United States

Posted: September 26, 2015 at 2:58 PM / IP Logged

I fixed it. I reset the virtual tach and it works fine now

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.