2004 F350 Viper 4706v remote start
Welcome Guest :)
ricerocketc
Member -
Posts: 3
Joined: October 19, 2015
Location: British Columbia, Canada
Posted: October 25, 2015 at 2:31 PM / IP Logged
Looking to install a viper remote start in my 04 F350 diesel. It has a factory keyless entry with alarm and no chip key. After opening the dash I noticed that the "factory" alarm is actually a code system alarm model H63DB which also has the ability to be used as a remote start as well. Because the viper is 2way I'd like to still install it, my question is will I have to remove the code system alarm/starter or can I wire the viper to arm/disarm the code security system.
viper wiring guide
h63db main harness
h63db extended harness
Velocity Motors
Moderator -
Posts: 12,488
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 25, 2015 at 9:05 PM / IP Logged
Use the DISARM input (+) BROWN wire to the status putput wire from the Viper and this will disable the alarm system for the Code Alarm.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
howie ll
Pot Metal -
Posts: 16,466
Joined: January 09, 2007
Location: United Kingdom
Posted: October 26, 2015 at 1:18 AM / IP Logged
Jeff you wrote disarm input (+) and connect to status output wire from Viper. But that goes to ground (-).
Regards, Howard.
ricerocketc
Member -
Posts: 3
Joined: October 19, 2015
Location: British Columbia, Canada
Posted: October 26, 2015 at 8:54 PM / IP Logged
So am I to understand this solution won't work then?
ricerocketc
Member -
Posts: 3
Joined: October 19, 2015
Location: British Columbia, Canada
Posted: October 29, 2015 at 6:57 PM / IP Logged
Anyone? I'd like to get this project going this weekend
If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.
Printable version
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
|
Follow the12volt.com
Wednesday, December 6, 2023
• Copyright © 1999-2023 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
Members
Search
Register
Login
