XK01 User Settings

Home / the12volt's Install Bay / Car Security and Convenience / XK01 User Settings

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jpinusmc

Member - Posts: 22

Joined: July 21, 2003

Location: California, United States

Posted: November 02, 2015 at 8:29 PM / IP Logged

I've installed a Viper 5706v with XK01 (AMDL) in my 03 Tahoe. The XK01 is connected D2D.

Remote start and locks work correctly. I am trying to get the window up feature to work, and this is where I run into problems.

I go into programming mode, and can switch between the different modes, but I cannot change between option 1 and 2 using the viper remote. Ive re-flashed the unit multiple times and even re-flashed with a different firmware and went back to the AMDL and still nothing.

Any ideas?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.