2000 Jeep Cherokee, Compustar 6102

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Jeep Cherokee, Compustar 6102

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

alec_endres

Member - Posts: 7

Joined: January 29, 2012

Posted: November 08, 2015 at 3:29 PM / IP Logged

I think I may have gotten it now, I ran it to my coil again, and then set the rpms where they are for cold start. Now if it disconnect the coils it will crank for quite some time, mimicking the cold start. I'll keep you posted. Thank you for the replies.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 08, 2015 at 3:31 PM / IP Logged

I was going to suggest a 1 second crank time but good luck anyway.

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.