the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 Honda Odyssey Sliding doors


Post ReplyPost New Topic
< Prev Topic Next Topic >
jgarcia1925 
Copper - Posts: 57
Copper spacespace
Joined: November 10, 2014
Location: Illinois, United States
Posted: November 13, 2015 at 4:53 PM / IP Logged Link to Post Post Reply Quote jgarcia1925
hello everyone,as always thanks for all the help you guys offer here in the forum, it is greatly appreciated.
Ok, so silly question, its been a while since i have done one of these bad boys. but will be doing one soon. I have a 2006 Odyssey with the power sliding doors. in order for my friend to retain those, he needs to buy a remote start with at least 2 Aux, like the one in the pic, and im going to use a flashlogic module which will control everything for me. my question is, do i simply take the Aux1 and Aux2 wires and connect them with the flashlogic wires labeled as left sliding door and right sliding door? or is another set of relays involved? i cant find much info on this and i cannot remember for the life of me.
any input would be great!
really hoping its as simple as connecting the wires from the RS to the module. otherwise this looks like a fairly easy install. unless there are nightmare problems i dont know about.
2006 Honda Odyssey Sliding doors - Last Post -- posted image. 2006 Honda Odyssey Sliding doors - Last Post -- posted image.
yellow_cake 
Copper - Posts: 178
Copper spacespace
Joined: December 01, 2011
Location: Saskatchewan, Canada
Posted: November 13, 2015 at 7:25 PM / IP Logged Link to Post Post Reply Quote yellow_cake
No relays necessary. It is as simple as connecting the wires directly from the R/S to the bypass module.
Overall average install, I do recall struggling with the transponder wires. It was in a tight area and the wires broke way too easily when trying to strip insulation.
jgarcia1925 
Copper - Posts: 57
Copper spacespace
Joined: November 10, 2014
Location: Illinois, United States
Posted: November 15, 2015 at 11:13 AM / IP Logged Link to Post Post Reply Quote jgarcia1925
Yellow cake, thanks a bunch. Thought so. I thought I heard those wires were a pain in the ass. We shall see how it goes. Thanks so. I thought we just had to go directly to the flash logic module.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, December 1, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer