2010 Escape/Evo all/Viper 4105

Home / the12volt's Install Bay / Car Security and Convenience / 2010 Escape/Evo all/Viper 4105

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ziggyb222

Silver - Posts: 593

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2004

Location: Maine, United States

Posted: December 13, 2015 at 12:14 PM / IP Logged

Doing a 2010 Escape right now... Parklights says PURPLE / wht drivers running board... Found a wire that test only about 9 to 10 volts when the switch is turned on... Not a full 12 volts.. It does have auto lights.... Any ideas or solutions for the park lights????

Back to Top

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: December 15, 2015 at 12:09 PM / IP Logged

I always grabbed mine in the rear drivers side door sill plate as it is coming from the passenger side of the vehicle. There are multiple wires of that color, so test to be sure you have the correct one.

Back to Top

ziggyb222

Silver - Posts: 593

Joined: January 04, 2004

Location: Maine, United States

Posted: December 15, 2015 at 1:45 PM / IP Logged

Thanks... I grabbed it at the BCM... Door sill would be better...Lol!!!!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.