the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

15 Tacoma Avital 4113 w/dball2


Post ReplyPost New Topic
< Prev Topic Next Topic >
beegbie 
Copper - Posts: 341
Copper spacespace
Joined: August 17, 2002
Location: United States
Posted: January 02, 2016 at 8:16 PM / IP Logged Link to Post Post Reply Quote beegbie
beegbie wrote:
Do a shutdown diagnostic and report back.
pts760 
Copper - Posts: 403
Copper spacespace
Joined: December 11, 2009
Location: United States
Posted: January 02, 2016 at 8:23 PM / IP Logged Link to Post Post Reply Quote pts760
beegbie wrote:
beegbie wrote:
Do a shutdown diagnostic and report back.
How is that possible if the unit won't respond?
I drink current, eat ohms, and bleed voltage
beegbie 
Copper - Posts: 341
Copper spacespace
Joined: August 17, 2002
Location: United States
Posted: January 03, 2016 at 7:30 AM / IP Logged Link to Post Post Reply Quote beegbie
It's specifically why shutdown diagnostics are built into the unit. It will tell you exactly why the unit isn't responding!
If you try it and get no response, it means you should check power, ground, override button operation, and ignition. If all those test properly then we can assume the unit is bad. A defective unit is extremely rare.
pts760 
Copper - Posts: 403
Copper spacespace
Joined: December 11, 2009
Location: United States
Posted: January 03, 2016 at 10:15 AM / IP Logged Link to Post Post Reply Quote pts760
beegbie wrote:
It's specifically why shutdown diagnostics are built into the unit. It will tell you exactly why the unit isn't responding!
If you try it and get no response, it means you should check power, ground, override button operation, and ignition. If all those test properly then we can assume the unit is bad. A defective unit is extremely rare.
Read the full post this has already been discussed
I drink current, eat ohms, and bleed voltage
beegbie 
Copper - Posts: 341
Copper spacespace
Joined: August 17, 2002
Location: United States
Posted: January 03, 2016 at 1:12 PM / IP Logged Link to Post Post Reply Quote beegbie
Then it's pretty simple. If you have power, ground, ignition, and a good programming button and it won't respond to shutdown diagnostics. The brain is bad. I've just never seen one go bad like this. I'm sure if you get a replacement everything will be fine.
Page of 2

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer