omega rs360edp 2007 honda pilot

Home / the12volt's Install Bay / Car Security and Convenience / omega rs360edp 2007 honda pilot

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bat9905

Copper - Posts: 131

Joined: January 13, 2008

Location: Washington, United States

Posted: December 22, 2015 at 1:28 AM / IP Logged

Currently working on a 2007 honda pilot . When i remote start the vehicle the neither the aftermarket remote or the oem remote will lock or unlock door. I have the rs door lock outputs wired to to keyless entry module on passenger side behind fuse box . any ideas as far as pulsing other wires to make this work would be greatly appreciated

bat9905

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: December 22, 2015 at 5:39 AM / IP Logged

The Factory remotes definitely won't work while the engine is running ( remote started ). I recently did a 2005 Pilot ( same

GEN as yours ) and ran the R/S's lock and unlock wires over to the PKP. That worked fine but that was only because the

2005 Pilot's still have the passenger door key cylinder. Your 2007 Pilot does not have the passenger door key cylinder.

Think you will have to make the lock connections inside the drivers door ( or use an XK02 with the HODL firmware ).

The driver door lock switch lock is BLACK/ white (-) at the power window master switch, lt. blue 20 pin plug, pin 8.

The driver door lock switch unlock is GREEN/ red (-) at the power window master switch, lt. blue 20 pin plug, pin 18.

Soldering is fun!

Back to Top

bat9905

Copper - Posts: 131

Joined: January 13, 2008

Location: Washington, United States

Posted: December 23, 2015 at 12:55 AM / IP Logged

Ok thanks I'll try that

bat9905

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.