2007 Peugeot 308 Lock Trigger

Home / the12volt's Install Bay / Car Security and Convenience / 2007 Peugeot 308 Lock Trigger (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

tafarelli

Copper - Posts: 55

Joined: January 06, 2016

Location: Croatia

Posted: January 07, 2016 at 1:19 PM / IP Logged

Ok will get back to you.

tafarelli

Copper - Posts: 55

Joined: January 06, 2016

Location: Croatia

Posted: January 07, 2016 at 1:56 PM / IP Logged

Please tell me where is the best +12V wire on bsi. I was using one of the wires underneath the steering wheel. Thanks

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 07, 2016 at 1:58 PM / IP Logged

Thick red? You're looking at it so you tell me!

tafarelli

Copper - Posts: 55

Joined: January 06, 2016

Location: Croatia

Posted: January 07, 2016 at 2:01 PM / IP Logged

Thanks. I am not by my car right now I will look tomorrow..

tafarelli

Copper - Posts: 55

Joined: January 06, 2016

Location: Croatia

Posted: January 07, 2016 at 2:23 PM / IP Logged

This diagram doesnt make sense to me because when in unlocked position, lock wire is +12V so +12V trigger to motor end wouldnt make difference..

2007 Peugeot 308 Lock Trigger - Page 3 -- posted image.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 07, 2016 at 2:25 PM / IP Logged

Take my word it's correct, you're looking at rest state; goodnight!!

tafarelli

Copper - Posts: 55

Joined: January 06, 2016

Location: Croatia

Posted: January 07, 2016 at 2:30 PM / IP Logged

On the other hand, this one is what I would think should work. It is basically same as mine only it uses another two relays for unlocking.

The only thing that bothers me is that, in description it says that both motor legs are open.

I will test tomorrow and post results. Greets

tafarelli

Copper - Posts: 55

Joined: January 06, 2016

Location: Croatia

Posted: January 07, 2016 at 2:32 PM / IP Logged

:)) Goodnight m8

tafarelli

Copper - Posts: 55

Joined: January 06, 2016

Location: Croatia

Posted: January 08, 2016 at 4:25 AM / IP Logged

howie ll wrote:

The answer to your next question. Door triggers.

White 40 way at BCU

Colours followed by pin numbers

Left front RED 27

Right front GREY 5

Left rear RED 34

Right rear WHITE 33

Hatch/Tailgate PURPLE 13

You will need to diode the door triggers together, 1N4004 bands towards door triggers.

According to this left front trigger wire is same as unlock wire can you please double check? Thanks

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 08, 2016 at 4:52 AM / IP Logged

Absolutely right but I don't have the car in front of me there might also be two or more white plugs.

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.