2013 Nissan Murano remote start wiring

Hi, wondering if anyone knows the wiring layout for a 2013 nissan murano for installing a remote start. I see all years listed but 2013.

NISSAN / MURANO / 2013 / Remote Start 12volts      white (40A)      +      BCM behind instrument cluster, black 3 pin plug, pin 1 Starter      red      -      BCM behind instrument cluster, gray 40 pin plug, pin 21 Second Starter      brown (push-button start)      -      push-button ign sw or BCM behind instr cluster, gry 40 pin plg, pin 29 Ignition      brown      +      BCM behind instrument cluster, black 40 pin plug, pin 11 Second Ignition      blue      -      BCM behind instrument cluster, gray 40 pin plug, pin 16 Third Ignition      N/A            Accessory      yellow      +      BCM behind instrument cluster, black 40 pin plug, pin 31 Second Accessory      blue      +      BCM behind instrument cluster, black 40 pin plug, pin 24 Keysense      yellow      +      key slot or BCM behind instrument cluster, green 40 pin plug, pin 10 Power Lock      use factory alarm arm or insert pin      -      BCM behind instrument cluster, green 40 pin plug, pin 17 Power Unlock      use factory alarm disarm or insert pin      -      BCM behind instrument cluster, green 40 pin plug, pin 15 Lock Motor      purple      5 wire      BCM behind instrument cluster, white 16 pin plug, pin 5 Unlock Motor      green      5 wire      BCM behind instrument cluster, white 16 pin plug, pin 6 Parking Lights+      red      +      dash fuse box, white 10 pin plug, pin 8 Parking Lights-      N/A            Hazards      green      -      hazard switch or BCM behind instr cluster, black 40 pin plug, pin 39 Turn Signal(L)      brown      +      BCM behind instrument cluster, white 16 pin plug, pin 15 Turn Signal(R)      green      +      BCM behind instrument cluster, white 16 pin plug, pin 14 Reverse Light      red      +      driver kick, harness to rear Door Trigger      lt. blue      -      BCM behind instrument cluster, green 40 pin plug, pin 39 Dome Supervision      yellow (suv), green (crosscabriolet)      -      BCM behind instrument cluster, white 16 pin plug, pin 16 Trunk/Hatch Pin      yellow (suv), red (crosscabriolet)      -      BCM behind instrument cluster, gray 40 pin plug, pin 35 or 19 Hood Pin      N/A            Trunk/Hatch Release      lt. grn (rear hndl sw/suv), blue (dash sw/xcabrio)      -      BCM behind instrument cluster, gray 40 pin plug, pin 36 Notes: On models with power liftgate, the open/close is yellow (-) at the power liftgate switch, gray 8 pin plug, pin 2. Power Sliding Door      N/A            Factory Alarm Arm      blue (driver door key lock)      -      power window main switch, white 16 pin plug, pin 4 Factory Alarm Disarm      red (driver door key unlock)      double -      power window main switch, white 16 pin plug, pin 6 Disarm No Unlock      Intelligent Key and ignition            Tachometer      RED / bk, RED / wh, RED / yl, lt. gn/rd, bu/wh, or pk/bk      ac      any fuel injector, gray 2 pin plug, pin 2 Wait to start      N/A            Brake Wire      blue      +      dash fuse box, wht 10 pin plg, pin 3 or BCM, grn 40 pin plg, pin 7 Parking Brake      pink to green      -      parking brake switch or instrument cluster, white 40 pin plug, pin 26 Horn Trigger      yellow      -      horn switch, gray 8 pin plug, pin 8 Memory Seat 1      red      -      driver kick, harness to rear Memory Seat 2      lt. blue      -      driver kick, harness to rear Memory Seat 3      N/A      -     ~wirewise~ Verify all wiring with your meter before making any connections!

Thank you kindly!

Trying to wire up a 3 wire led scanner(red, black, and yellow wire) to 2013 nissan murano. It has a remote start installed but has no negative armed output(orange wire on module brain). Pretty sure will need a relay, just dont know how to wire it up.

Anyone?

What brand scanner? The varad brand has optional wiring where it automatically comes on when the key is offGary Sather

The one I picked up is plasmaglow brand(girlfriend had to have pink color and plasmaglow is only one I could find in pink lol). I did end up getting it all working with a relay: scanner red wire to 12v scanner black wire to ground scanner yellow wire to pin 87a pin 30 and 86 ground pin 85 ignition on when key is removed, off when ignition is on