2016 Camry PTS light issue

Installed standalone remote start using idatalink ads_alca module, works fine but parking lights are not on when car is remote started, connected to pin 30 black wire/ecu white 30pin plug.   After checking found they work if headlight switch is in drl/off position but they don't work if the switch is in the auto position.   Has anyone come across this, any where else to hook the negative output for parking lights that will work when the light switch is in auto position.

It won't work if you use negative park lights. You need to use the positive park lights to work when in the auto position. Pink wire in a white 36 pin plug at the dash fuse box.

It won't work if you use negative park lights. You need to use the positive park lights to work when in the auto position. Pink wire in a white 36 pin plug at the dash fuse box.

brownsfan1 wrote: It won't work if you use negative park lights. You need to use the positive park lights to work when in the auto position. Pink wire in a white 36 pin plug at the dash fuse box.

Thanks for the solution.