Viper alarm issues

Home / the12volt's Install Bay / Car Security and Convenience / Viper alarm issues

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rhegg2006

Member - Posts: 3

Joined: May 07, 2016

Location: California, United States

Posted: May 07, 2016 at 8:02 AM / IP Logged

Hello,

I was wondering if some people can help me troubleshoot in the right direction. I have my viper alarm for about 6 years now and recently the battery got drain and I had to replace the battery. When I replace the battery my remote start won't work it's tries to start three times and fail. Also the door locks don't work any more it won't lock or unlock the car with the viper remote. It will however lock and unlock with my factory key. If I arm the vehicle the alarm still works.

I check and all the fuses are good in the car. I am not certain if I need it reprogram or just get a new one?

Thanks in advance for your advice.

Rhegg

Back to Top

rhegg2006

Member - Posts: 3

Joined: May 07, 2016

Location: California, United States

Posted: May 07, 2016 at 8:03 AM / IP Logged

Also the car is a Mazda 3 2010 and I believe the viper alarm is 5701. Thanks

Back to Top

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: May 07, 2016 at 9:20 PM / IP Logged

What bypass is used?

I had one DB-ALL loose it programming after a car battery was replaced after going completely dead.

Had to reprogram the module

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

rhegg2006

Member - Posts: 3

Joined: May 07, 2016

Location: California, United States

Posted: May 07, 2016 at 9:24 PM / IP Logged

Smokeman1 funny thing you say that I went ahead and got with a local installer today and he had to reprogram the alarm. He even gave me the instruction if it ever happen to me again. Thanks everyone for your support I consider this problem solved.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.