2010 Chev. Suburban install

Home / the12volt's Install Bay / Car Security and Convenience / 2010 Chev. Suburban install

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

libfiremedic

Member - Posts: 1

Joined: June 28, 2016

Location: Missouri, United States

Posted: June 28, 2016 at 9:25 PM / IP Logged

I installed my python PS3000 in my 2010 Chev. Suburban... I had previously installed it in my 2010 Dodge Ram 1500. This time I used a DBALL for the bypass mod. Only issue is that the alarm only has 1 D2D port... How do I install the DBALL W2W instead of D2D... I just can't seem to wrap my head around how.

Back to Top

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: June 29, 2016 at 2:11 PM / IP Logged

You literally wire the ins and outs from the alarm to the bypass. W2W means wire to wire.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.