the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 GT Mustang Disable Factory Alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
stang628 
Member - Posts: 5
Member spacespace
Joined: June 26, 2016
Location: Texas, United States
Posted: July 24, 2016 at 4:08 PM / IP Logged Link to Post Post Reply Quote stang628
How do I disable the factory alarm. Do I permanently ground the "Factory Alarm Disarm"?
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: July 24, 2016 at 6:03 PM / IP Logged Link to Post Post Reply Quote lurch228
No it just needs to be pulsed.
stang628 
Member - Posts: 5
Member spacespace
Joined: June 26, 2016
Location: Texas, United States
Posted: July 24, 2016 at 6:24 PM / IP Logged Link to Post Post Reply Quote stang628
When the aftermarket alarm locks/unlocks, I need a relay setup to "pulse" the factory alarm lock/unlock circuit? In effect telling the factory alarm that the doors are locked/unlocked?
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: July 24, 2016 at 7:00 PM / IP Logged Link to Post Post Reply Quote lurch228
Your aftermarket alarm should have the needed wires to do that no relay needed. typically a negative pulse. What make/model of alarm is it?
stang628 
Member - Posts: 5
Member spacespace
Joined: June 26, 2016
Location: Texas, United States
Posted: July 24, 2016 at 7:25 PM / IP Logged Link to Post Post Reply Quote stang628
Python 3105P. The lock and unlock wires, would I tee off them and go to the factory arm and disarm wires?
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: July 24, 2016 at 8:44 PM / IP Logged Link to Post Post Reply Quote lurch228
With that system yes as it doesn't have arm disarm outputs.
stang628 
Member - Posts: 5
Member spacespace
Joined: June 26, 2016
Location: Texas, United States
Posted: July 24, 2016 at 8:53 PM / IP Logged Link to Post Post Reply Quote stang628
So, when I arm and disarm the Python, it will also arm and disarm the factory alarm. The car will have 2 active alarms.
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: July 24, 2016 at 11:09 PM / IP Logged Link to Post Post Reply Quote lurch228
Yes but the factory can't be permanently disabled, at least not easily that is.
stang628 
Member - Posts: 5
Member spacespace
Joined: June 26, 2016
Location: Texas, United States
Posted: July 24, 2016 at 11:15 PM / IP Logged Link to Post Post Reply Quote stang628
Thank for your help Lurch228. I will make the wiring mods tomorrow.
lurch228 
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: July 25, 2016 at 12:29 AM / IP Logged Link to Post Post Reply Quote lurch228
No problem.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, December 7, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer