the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

turbo timer problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
blaster129 
Member - Posts: 1
Member spacespace
Joined: September 14, 2016
Location: Israel
Posted: September 14, 2016 at 4:34 PM / IP Logged Link to Post Post Reply Quote blaster129
hi i have sorento 2004 2.5 crdi
i installed turbo timer but the key wont lock the doors until the timer is working what can i do? i heard that i need to cut some wire
any body know what wire is that?
in the ignition swich i have 6 wires
1-2 blue and green 12v+
3-ACCESSORY
4 IGNITION
5 IGNITION 2
6.starter
only if i close the doors with the key it will lock all the doors

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, November 30, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer