the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 5305V and Flashlogic FLCAN


Post ReplyPost New Topic
< Prev Topic Next Topic >
wyciwug 
Copper - Posts: 140
Copper spacespace
Joined: February 08, 2008
Location: Virginia, United States
Posted: November 29, 2016 at 8:48 PM / IP Logged Link to Post Post Reply Quote wyciwug
Hello
I have a question. What is E-Brake status input and output?
Does anyone know where is that wire on the Viper 5305V?
Thanks
dcd
Ween 
Platinum - Posts: 1,302
Platinum spacespace
Joined: August 01, 2004
Location: Illinois, United States
Posted: November 29, 2016 at 10:33 PM / IP Logged Link to Post Post Reply Quote Ween
Emergency/Parking Brake status....brake actuated, ground output.
On the Auxiliary/Shutdown/Trigger harness (White 24 pin connector)...pin 13, BLACK/ white.
wyciwug 
Copper - Posts: 140
Copper spacespace
Joined: February 08, 2008
Location: Virginia, United States
Posted: November 30, 2016 at 12:10 PM / IP Logged Link to Post Post Reply Quote wyciwug
I would like to connect the wires here and please can somebody help me to check if all connections are correct? Customer only wants me to hook it up for REmote start only, no alarm needed.
I will use Data Mode.
Thank you members
Remote Start, 10-pin Heavy Gauge to Car:
12 volts RED / black + Red+ RED / white to 12volt White in car (Dash fuse)
Starter Green and Violet to White in car (ignition sw pin 2) <<<<???
Ignition 1 Pink to White in car (ignition sw pin 3) also to Pink on FLCAN.
Ignition 2 Pink white or Pink black (?) to Pink in car <<<????
Accessory Orange to Red (ignition sw)
Auxiliary/shutdown/trigger 24-pin
Pin 10 Blue (-) trunk pin/instant trigger input to Yellow/red-Trunk status (-) output on FLCAN
Pin 13 BLACK/ white (-) Parking brake input to Green E-brake status (-) output on FLCAN Flash Logic
Flash Logic FLCAN connections:
Will connect them as shown in diagram. However, I have a question on the Relay connection #85 will be to ground or to ORANGE in the RS system 5-pin connector of the Main Harness?
dcd

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, June 13, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer