2007 king ranch /klon

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2007 king ranch /klon

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bat9905

Copper - Posts: 131

Joined: January 13, 2008

Location: Washington, United States

Posted: January 11, 2017 at 12:38 PM / IP Logged

I've never used klon . I'm currently registered with web link and have a cable flashing modules but looking to use klon technology . Anything I should know before taking on this . I hate losing the install because the customer only has one key. Thanks for any help

bat9905

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 11, 2017 at 7:09 PM / IP Logged

KLON works great! It's easier than doing the routine with two factory keys and hitting the remote start button.

Only two things to mention.

If you do "on-site" installs, make sure you have a good WI-Fi signal. I use a small laptop in the field.

I usually mate the R/S brain to the Bypass module during bench prep, so I leave the assembly in the vehicle during the KLON

process. I have to remember to allow some access room for pressing the button and disconnecting the harnesses, etc. The

small laptop sits on the drivers seat and the ADS USB cable reaches fine.

Other than that, it's real straight forward. Fortin's DCryptor process is a little confusing the first time you use it but

it works well, too.

Soldering is fun!

Back to Top

bat9905

Copper - Posts: 131

Joined: January 13, 2008

Location: Washington, United States

Posted: January 11, 2017 at 9:54 PM / IP Logged

Great!! thanks for the advice .

bat9905

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.