the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

5305L Avital R/S with DB3


Post ReplyPost New Topic
< Prev Topic Next Topic >
donhug45 
Member - Posts: 2
Member spacespace
Joined: January 21, 2009
Location: California, United States
Posted: June 29, 2017 at 5:23 PM / IP Logged Link to Post Post Reply Quote donhug45
How do you configure alarm to work D2D? Is it in programming as I can't see any reference. Or do you connect power and ground to the 4 pin D2D plug and that actuates it?
97f150ext 
Copper - Posts: 104
Copper spacespace
Joined: January 17, 2004
Location: United States
Posted: June 30, 2017 at 3:42 PM / IP Logged Link to Post Post Reply Quote 97f150ext
No programming is needed. You connect the 4 pin harness from the 5305 to the D2D port of the DB3. You need to program options for both units, but there is nothing to program the D2D to work.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer