GMDLBP issue with programming

Home / the12volt's Install Bay / Car Security and Convenience / GMDLBP issue with programming

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mukit

Member - Posts: 1

Joined: August 19, 2017

Location: Ohio, United States

Posted: August 19, 2017 at 6:58 AM / IP Logged

I installed an Avital 4105 and Xpresskit GMDLBP into my 2003 avalanche. I have constant 12v to the red wire, grounded the unit to the chassis, purple wire to pin 2 of the dlc, brown wire to the pink wire of the remote start, green and blue wires from to the corresponding wires of the remote start unit. The vehicle starts and runs fine but the door locks do not work. When I push lock or unlock on the fob the Xpresskit interface LED lights up but nothing happens. I have reset the xpresskit and made sure I properly selected type 4 by counting the flashes.

Any help would greatly be appreciated

2003 Avalanche

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.