Command Start CS 310 Remote Programming

Home / the12volt's Install Bay / Car Security and Convenience / Command Start CS 310 Remote Programming

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mycolon

Member - Posts: 1

Joined: August 27, 2017

Location: British Columbia, Canada

Posted: August 27, 2017 at 5:25 PM / IP Logged

Hi

I just picked up an 02 Toyota Tundra with a Command Start CS 310 remote start system installed. The remote key fob will not communicate with the system. I installed a new battery in the remote with no change. I then tried to program the remote by first flashing the hood pin switch. When I held then tapped the switch my park lights turned on for a second and then go out not giving me the chance to program the remote. Any ideas what I may be doing wrong?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.