the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2015 Wrangler/ ALCA ignition wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
kreg357 
Platinum - Posts: 7,780
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: September 23, 2017 at 10:40 AM / IP Logged Link to Post Post Reply Quote kreg357
Not sure on that indication. The only thing the install guide states is that a Green blinking LED during a R/S attempt is
Correctly Programmed and Operational. Doesn't mention any specific flash count. Perhaps a call to iDatalink is in order.
I've never encountered a problem like that.
Just a thought, is the rest of the Viper wired as per above? Specifically the thick Violet Starter output to the ADS AL-CA
Black/White wire ( W2W mode ) and both of the thick Reds going to +12V?
Soldering is fun!
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: September 23, 2017 at 10:45 AM / IP Logged Link to Post Post Reply Quote ziggyb222
yes... I am going to double check voltages with my meter..thank you
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: September 23, 2017 at 12:46 PM / IP Logged Link to Post Post Reply Quote ziggyb222
It was a cold soldered joint on the ignition wire feeding the module. When I metered it it was a wacky low number. Cut the connection and reconnected. Works great.. Thanks for your help!!!!
kreg357 
Platinum - Posts: 7,780
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: September 23, 2017 at 1:34 PM / IP Logged Link to Post Post Reply Quote kreg357
Great news! Glad it's working OK now. 2015 Wrangler/ ALCA ignition wiring - Page 2 -- posted image.
Soldering is fun!
Page of 2

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, March 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer