the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002-2004 Toyota Camry Remote Start w/Keyless Pictorial


Post ReplyPost New Topic
< Prev Topic Next Topic >
volt_amba 
Member - Posts: 4
Member spacespace
Joined: February 03, 2020
Location: Michigan, United States
Posted: March 28, 2020 at 5:56 AM / IP Logged Link to Post Post Reply Quote volt_amba
R/S system. i am using CS800.
kreg357 
Platinum - Posts: 7,273
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: New York, United States
Posted: March 28, 2020 at 7:58 AM / IP Logged Link to Post Post Reply Quote kreg357
With the CS800-s, the easiest way to get all the doors to unlock with just one press
of the aftermarket FOB's Unlock button is to change the CS800-s programming to output
a "double unlock pulse". The timing should be correct for the Camry and unlock all the
doors with its' two unlock pulses. When set, you will actually hear two unlocks. First
the Drivers door and then a split second later the rest of the doors. In the install
guide, see programming feature 1-03. Factory Default is OFF. You want to change it to
Optional Setting-II, which will provide two unlock pulses with a single press. The install
guide also details how to use the remotes to make the change.
Short of that, on Toyota's, there is usually a wire in the Passenger Kick Panel that is
the Unlock signal from the Passengers Door switch that will unlock all doors with a single
pulse. This would require a wiring change and extending the CS800-s Unlock wire for the
longer trip to the PKP area. I believe I used this method on the 2005 Toyota Sienna
Pictorial but the wire color and plug location would be different.
In my local area, with a female driver, I always leave progressive unlock ON unless
specifically requested otherwise. Provides better parking lot / parking garage safety.
Soldering is fun!
Page of 4

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, December 3, 2020 • Copyright © 1999-2020 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer