avital 5105l

Home / the12volt's Install Bay / Car Security and Convenience / avital 5105l

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

fastfrs1

Member - Posts: 9

Joined: November 26, 2017

Location: Louisiana, United States

Posted: December 02, 2017 at 6:25 PM / IP Logged

i have a avital 5105l and trying to figure out why when the alarm goes off and i unlock the truck and turn the key on it doesnt reset the alarm can someone give me any info maby i missed hooking up a wire

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 02, 2017 at 7:04 PM / IP Logged

Do you think you could tell us make model and year, then what you've wired to where orthewrwise no one is going to answer you because where does one start?

Back to Top

fastfrs1

Member - Posts: 9

Joined: November 26, 2017

Location: Louisiana, United States

Posted: December 02, 2017 at 7:25 PM / IP Logged

its a 1994 chevy c 1500. so far all i have hooked up is door locks, siren, and park lights.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 02, 2017 at 7:28 PM / IP Logged

Try hooking up ignition and if this a remote start program safe start, also look in the vehicle wiring in case your vehicle is there.

Back to Top

fastfrs1

Member - Posts: 9

Joined: November 26, 2017

Location: Louisiana, United States

Posted: December 03, 2017 at 12:37 AM / IP Logged

ok will do that will i need relays or no?

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 03, 2017 at 4:58 AM / IP Logged

The wire on your ignition switch that goes to 12V+ on IGN (panel lights on) and stays live during cranking, connect to the PINK heavy gauge wire from the 5105.

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 03, 2017 at 4:59 AM / IP Logged

You really should wire up the heavy gauge wires etc. etc. before asking these questions also when you join, solder.

Back to Top

fastfrs1

Member - Posts: 9

Joined: November 26, 2017

Location: Louisiana, United States

Posted: December 04, 2017 at 6:36 PM / IP Logged

will i need relays to do so?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.