pkall lincoln navigator will not stay programmed

Home / the12volt's Install Bay / Car Security and Convenience / pkall lincoln navigator will not stay programmed

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

racinwarrior2

Member - Posts: 1

Joined: January 10, 2018

Posted: January 10, 2018 at 7:24 AM / IP Logged

I am having an issue with a PKALL on a 2012 Lincoln Navigator in w2w configuration

I have verified correct connection of TX/RX wires

+12v and GND wires are connected correctly

Pink ignition wire is connected

GWR wire is connected to remote start

I am able to go through the programming procedure. Hold the button on the PKALL, plug in both connectors, insert 1st key for 3 seconds, insert 2nd key for 3 seconds, then remote start. The vehicle will start and the PKALL will flash the LED 10 times verifying it has been programmed. I shut down the vehicle, try to remote start again and get a flashing theft light and a no start. Vehicle displays "Key not programmed" on display.

I have tried erasing all of the keys stored in the vehicle using Ford IDS. Same situation, module seems to program then doesn't work a 2nd time

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.