Viper 4806V, DBALL DB3, 2009 Mazdaspeed3

Home / the12volt's Install Bay / Car Security and Convenience / Viper 4806V, DBALL DB3, 2009 Mazdaspeed3

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sebi-97

Member - Posts: 1

Joined: January 14, 2018

Location: Ontario, Canada

Posted: January 14, 2018 at 9:38 AM / IP Logged

I am installing a Viper 4806V combined with a DBALL DB3 on a 2009 Mazdaspeed3. (Same as a 2009 Mazda 3)

I can not for the life of me get the door lock/unlock working Viper 4806V, DBALL DB3, 2009 Mazdaspeed3 -- posted image.

The DB3 manual says to:

Connect (MUX) Lock Output from DB3 to: driver kick or passenger dash fuse box, brown 32 pin plug (J06), pin T. (I choose to connect to kick panel) Now, for the color it says: green/red to black/blue... So which is it? Green/red or black/blue. I've tried both with no success

Any ideas?

Here is my link with current soldered in-car connections:

Pin Out

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.