2010 Honda Accord factory disarm wire

Home / the12volt's Install Bay / Car Security and Convenience / 2010 Honda Accord factory disarm wire

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

godd dan it

Copper - Posts: 446

Joined: July 01, 2004

Location: New Jersey, United States

Posted: February 01, 2018 at 9:22 PM / IP Logged

What color wire is the factory alarm disarm wire on a 2010 Honda Accord? Do I need to go into the driver’s side door?

Thanks

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: February 02, 2018 at 5:02 AM / IP Logged

What bypass module are you using?

With a vehicle like that, I look for a full featured bypass module that takes care of the

transponder and does the locks and alarm. Saves a bunch of time and doesn't cost much

more. My favorite module for that car is the ADS AL-CA flashed with the DL HA3 firmware.

A few connections at the ignition switch allows the bypass module to supply Tach, Brake,

Hood, Door & Trunk Status and take care of the locks and alarm without going into the door.

Soldering is fun!

Back to Top

godd dan it

Copper - Posts: 446

Joined: July 01, 2004

Location: New Jersey, United States

Posted: February 02, 2018 at 3:02 PM / IP Logged

Yes I should have used a module that can do everything, but I was trying to save some money (a little more profit for me) on an install. I used the XK05 and completely forgot that it doesnt disarm the factory alarm. Now im paying for it in labor time.

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: February 02, 2018 at 6:01 PM / IP Logged

You should be able to do it at the power window master switch:

http://diagrams.marktoonen.nl/printlist.aspx?MakeID=3&ModelID=20116

http://www.revbase.com/BBBMotor/Wd/DownloadPdf?id=170220

My ex once told me I have a perfect face for radio.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.