the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Factory Fog Light Switch, 2009 Buick Lucerne?


Post ReplyPost New Topic
< Prev Topic Next Topic >
96-vortec@15psi 
Member - Posts: 6
Member spacespace
Joined: March†19, 2018
Posted: March†19, 2018 at 3:52 PM / IP Logged  
The factory switch sends out a momentary signal. I need to convert the momentary signal to a constant. Do I use a locking relay? What would be a good part number for a relay if this will work?
96-vortec@15psi 
Member - Posts: 6
Member spacespace
Joined: March†19, 2018
Posted: March†19, 2018 at 3:53 PM / IP Logged  
2009 Buick Lucerne
i am an idiot 
Platinum - Posts: 13,609
Platinum spaceThis member consistently provides reliable informationspace
Joined: September†21, 2006
Location: Louisiana, United States
Posted: March†19, 2018 at 6:41 PM / IP Logged  
Do you need it to turn off with another pulse. pr when the key is turned off?
96-vortec@15psi 
Member - Posts: 6
Member spacespace
Joined: March†19, 2018
Posted: March†19, 2018 at 7:07 PM / IP Logged  
It would be nice to turn off with the same pulse switch but not necessary.
i am an idiot 
Platinum - Posts: 13,609
Platinum spaceThis member consistently provides reliable informationspace
Joined: September†21, 2006
Location: Louisiana, United States
Posted: March†19, 2018 at 9:33 PM / IP Logged  
96-vortec@15psi 
Member - Posts: 6
Member spacespace
Joined: March†19, 2018
Posted: March†20, 2018 at 11:43 AM / IP Logged  
Is there a part number for a locking relay that would work for my application? If I go with the multiple standard relay what size diode, 1 or 2 amp?
eguru 
Copper - Posts: 340
Copper spacespace
Joined: February†04, 2018
Location: Quebec, Canada
Posted: March†20, 2018 at 5:32 PM / IP Logged  
This might be a more flexible solution for you.
https://pac-audio.com/catalog/specialty-items/tr7
96-vortec@15psi 
Member - Posts: 6
Member spacespace
Joined: March†19, 2018
Posted: March†20, 2018 at 7:07 PM / IP Logged  
This looks like the route Iím going to use. I will let you know, thanks for the help!
96-vortec@15psi 
Member - Posts: 6
Member spacespace
Joined: March†19, 2018
Posted: March†23, 2018 at 10:25 PM / IP Logged  
The PAC Tr7 works perfectly for my application. Thanks for the info.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, February 2, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer