Trying to combine Clifford 3706x and Install gear

Home / the12volt's Install Bay / Car Security and Convenience / Trying to combine Clifford 3706x and Install gear

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

onlylive_once

Member - Posts: 13

Joined: November 12, 2017

Location: Texas, United States

Posted: April 17, 2018 at 1:21 PM / IP Logged

So my buddies Jeep has a clifford 3706x installed. Jeep has no power locks. Bought Amazon install gear universal power door lock kit with keyless entry and 3 2 wire and 1 5 wire actuator and I bought an extra 5 wire. He left off the part the jeep already had a security system.

So looks like the alarm has a 2 wire blue and green door lock harness. He doesn't have the harness though. So I still gotta figure out where to come up with that.

But the install gear kit has a brown and white from switch. Is this what I would hook to the blue and green of the alarm. Cause there is no actual door switch.

Or do I just tie the blue and green from clifford into the blue and green from the power door lock kit.

Anyone know where I can get that 2 pin harness?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.