the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Clifford / Viper Remote Start - Audi A3 Error


Post ReplyPost New Topic
< Prev Topic Next Topic >
lowbug 
Member - Posts: 4
Member spacespace
Joined: January 12, 2003
Location: United Kingdom
Posted: June 03, 2018 at 7:06 AM / IP Logged Link to Post Post Reply Quote lowbug
Hi, fitted my Audi A3 2017/ 2018 facelift with a Clifford remote start 5906. It all works ok, just one thing is if I remote start from the Clifford I get an system error on the virtual dash "start system fault visit workshop". You can ignore it and after using the key this resets the message from the screen.
I have used this guide as a basic point for picking up the wiring and the car does remote start as well as immobize the starter ok. The diagram I have used is page 6. https://directechs.blob.core.windows.net/documents/ds4plus-vw07_fsg_en_nf20180112.pdf
I have not used the diodes or the keysense wire. I have also left the key in the ignition and remote started with the same issue.
The reason I didn't use the diodes is I have used the 5906 ignition relay, the starter cut and output relay and also the flex relay as a second ignition ( wired to the yellow and green).
Any ideas?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer