the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2016 Dodge Ram 2500 Diesel Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
alwayswet 
Member - Posts: 4
Member spacespace
Joined: June 15, 2018
Location: Virginia, United States
Posted: June 20, 2018 at 5:49 PM / IP Logged  
I have found the post for 2014 Ram but would like to know if the wiring is the same. I need to install a vehicle tracker for a fleet vehicle and just need 12v constant, switched and ground locations the rest of wiring info would be helpful for later or someone else if someone has it.
Thank you!
Bill
Freedom Isn't Free, Never Forget 9/11
i am an idiot 
Platinum - Posts: 13,276
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 20, 2018 at 8:21 PM / IP Logged  
With regular key, or smart key?
i am an idiot 
Platinum - Posts: 13,276
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 20, 2018 at 8:24 PM / IP Logged  
Regular Key
12 Volts      Red (40A)      +      BCM under driver dash, black 4 pin plug (B), pin 3           
Ground      (chassis ground)                     
Starter      Lt. Blue/Tan (for starter kill only)      +      BCM under driver dash, black 24 pin plug (A), pin 19           
Ignition      Violet/Brown      +      Ignition Node (ignition switch), black 6 pin plug, pin 4
Smart Key
12 Volts      red (40A)      +      BCM under driver dash, black 4 pin plug (B), pin 3           
Ground      (chassis ground)                     
Starter      lt. blue/tan (for starter kill only)      +      BCM under driver dash, black 24 pin plug (A), pin 19           
Ignition      pink/white (for ignition sense only)      +      BCM under driver dash, black 48 pin plug (E), pin 27
alwayswet 
Member - Posts: 4
Member spacespace
Joined: June 15, 2018
Location: Virginia, United States
Posted: June 24, 2018 at 4:24 PM / IP Logged  
Tip start key.
Excuse my ignorance, but is the 12v switched tied to the computer and should it be isolated in any way? Just looking for a source that is 12 v when ignition on, should I use one of the feeds for the 12v outlet?
Thank you
Freedom Isn't Free, Never Forget 9/11

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, February 26, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer