Splitting Speaker Outputs to Speakers and Amp

Home / the12volt's Install Bay / Car Audio / Splitting Speaker Outputs to Speakers and Amp

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

69-er

Member - Posts: 18

Joined: February 26, 2009

Location: New Mexico, United States

Posted: November 21, 2018 at 4:51 PM / IP Logged

Would there be any problems in connecting the speaker outputs of a head unit to the high level inputs of an amplifier in addition to the speakers? It just doesn't sound right to share the speaker outputs to power the speakers and the amp inputs.

Back to Top

eguru

Copper - Posts: 340

Joined: February 04, 2018

Location: Quebec, Canada

Posted: November 21, 2018 at 5:42 PM / IP Logged

69-er wrote:

Would there be any problems in connecting the speaker outputs of a head unit to the high level inputs of an amplifier in addition to the speakers? It just doesn't sound right to share the speaker outputs to power the speakers and the amp inputs.

That is fine. The amp high level inputs don't present any meaningful additional load to the HU output.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.