2010 GMC Canyon, Remote Start Wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2010 GMC Canyon, Remote Start Wiring

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sparxx513

Copper - Posts: 56

Joined: February 21, 2014

Posted: December 30, 2018 at 4:52 PM / IP Logged

Anyone able to provide a wiring print for this one? Will be using a Avital Remote start along with an Idatalink AL-CA for the bypass and data interface. Anyone have any tips for this one? Seems to be a little different from the remote starts ive done.

Thanks in advance guys.

Back to Top

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: December 31, 2018 at 7:52 AM / IP Logged

It's listed in the wiring section:

https://www.the12volt.com/installbay/vehiclewiring/1/yeard/GMC.html

https://www.the12volt.com/installbay/forum_posts.asp?tid=118623

My ex once told me I have a perfect face for radio.

Back to Top

sparxx513

Copper - Posts: 56

Joined: February 21, 2014

Posted: January 12, 2019 at 4:19 PM / IP Logged

Just finished this one up. A couple notes of things i found. According to all the wiring prints i found. The +Brake wire is supposed to be Light blue at the brake pedal. This on had no light blue, and had 12v when the brake was not pressed. No wire on the two switches at the pedal had 12v when the pedal was pushed. There is a harness that is used for a trailer connection, trailer brake stored just up and forward of the brake pedal. This one has a light blue wire with 12v when the brake is applied.

Also, for the drivers door trigger there is a gray with black strip wire in the drivers kick.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.