Factory Keyless Lock Times 2

Home / the12volt's Install Bay / Car Security and Convenience / Factory Keyless Lock Times 2

Welcome Guest :)

Members

< Prev Topic Next Topic >

neo_1975

Member - Posts: 3

Joined: March 31, 2011

Posted: May 06, 2019 at 11:18 PM / IP Logged

Trying to take the factory neg door lock trigger to activate a remote start. Im thinking the neg trigger would activate a relay.. then the next lock signal would pass thru to the starter to activate remote start ... but how?

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: May 07, 2019 at 1:14 AM / IP Logged

I think you can use a PAC TR7. It may be better to use the actuator wires as a trigger.

My ex once told me I have a perfect face for radio.

mgoetz74

Silver - Posts: 424

Joined: February 15, 2012

Location: United States

Posted: May 08, 2019 at 1:58 PM / IP Logged

the RS has to have a activation input (white/blue on vipers) wire that gets hooked to the door lock wire and you can go in to the RS menu and change it from 1 2 or 3 pulses. I use to do it all the time on vipers when customer didn't want a extra remote

33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

neo_1975

Member - Posts: 3

Joined: March 31, 2011

Posted: May 08, 2019 at 10:37 PM / IP Logged

I used to do this too... however the rs in question only has a single pulse to start. Was thinking of a channel expander to do this but thought a few relays would get the job done. May go with the Pac solution.

Thanks for your thoughts!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.