the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Long 90 Degree Ring Terminal?


Post ReplyPost New Topic
< Prev Topic Next Topic >
tipsymcstagger 
Member - Posts: 20
Member spacespace
Joined: December 17, 2006
Location: United States
Posted: June 04, 2019 at 2:27 PM / IP Logged Link to Post Post Reply Quote tipsymcstagger
Pictured below is an OE battery cable ring terminal from a BMW. I am making new cables and the 90 degree lug I got from Crimp Supply is not as long between the center of the eye and the 90 degree bend as the original. Because of the design of the post this secures to, it's not laying in properly.
Are there 90 degree lugs available that are specifically longer before they bend? As far as I can tell, the OE lug is not an individual BMW part number. It's part of the cable assembly.
It's for 4 ga cable and a 5/16th post.
Long 90 Degree Ring Terminal? -- posted image.
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: June 04, 2019 at 7:47 PM / IP Logged Link to Post Post Reply Quote geepherder
Maybe something like this:
http://www.quickcable.com/doclib/d1838.pdf
My ex once told me I have a perfect face for radio.
tipsymcstagger 
Member - Posts: 20
Member spacespace
Joined: December 17, 2006
Location: United States
Posted: June 04, 2019 at 8:01 PM / IP Logged Link to Post Post Reply Quote tipsymcstagger
I just measured the ones I already have (from Crimp Supply) and they seem pretty much identical to the measurements in that docuemnt.
But thank you for trying!
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: June 04, 2019 at 9:21 PM / IP Logged Link to Post Post Reply Quote geepherder
Search Google for "long palm cable lug". If you look at the image results, you'll see a bunch of straight (not 90) blanks (no holes), but you may be able to bend/drill them. You'll likely have to order internationally as well. Lot's of results in Australia, UK, etc.
Another option would be making your own out of copper tubing. Here's one example video from youtube:
https://www.youtube.com/watch?v=RpFb_Yxl_hA
You could always tin them for a more factory appearance.
My ex once told me I have a perfect face for radio.
Ween 
Platinum - Posts: 1,368
Platinum spacespace
Joined: August 01, 2004
Location: Illinois, United States
Posted: June 04, 2019 at 9:39 PM / IP Logged Link to Post Post Reply Quote Ween
https://www.mouser.com/ProductDetail/Aptiv-formerly-Delphi/12129598-L?qs=sGAEpiMZZMs7eK6h2EBtKiAPJPX6chA86aMitEmzmKs%3D

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, December 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer