2008 Honda Accord, Remote Start Problem

Home / the12volt's Install Bay / Car Security and Convenience / 2008 Honda Accord, Remote Start Problem

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

icerw

Member - Posts: 7

Joined: December 02, 2016

Location: Ireland

Posted: June 20, 2019 at 12:39 PM / IP Logged

geepherder wrote:

Open the door.

Turn the ignition on then off.

Press and hold the valet button until you get three chirps (LED flashes), then release.

Press and release the valet button once then press and hold.

While holding the valet button, press the unlock button on your remote.

Release the valet button and either close the door or cycle the ignition to exit programming.

Today i tried again and is working thank you very much guys

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.