Black Widow Alarm Problem

Home / the12volt's Install Bay / Car Security and Convenience / Black Widow Alarm Problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cbowery76

Member - Posts: 8

Joined: May 28, 2003

Posted: June 06, 2003 at 7:56 PM / IP Logged

I recently installed a Black Widow Keyless Upgrade kit in a 2k2 Nissan Sentra. The alarm works fine except that on occasion it will arm itself when turning the ignition from run to off. This is very annoying as you would guess. It also dosen't seem to arm unless I close all doors and wait a few seconds. Any thoughts?

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: June 06, 2003 at 9:33 PM / IP Logged

make sure you have this wire hooked up the alarm switched ign wire.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

robHI

Member - Posts: 35

Joined: August 22, 2002

Location: United States

Posted: June 07, 2003 at 2:32 AM / IP Logged

did u put in diodes?

cbowery76

Member - Posts: 8

Joined: May 28, 2003

Posted: June 09, 2003 at 5:41 AM / IP Logged

I'm pretty sure it's hooked up correctly. I can double check. I didn't use diodes however, I wasn't aware that you needed them on the ignition wire. If so, please let me know.

BulletTooth

Copper - Posts: 122

Joined: December 13, 2002

Location: United States

Posted: June 09, 2003 at 10:43 AM / IP Logged

This is a self arimng feature that if you don't like you could disable by reprogramming. Check your owners/install manual it tells you how to do it, if not just give me the model and I'll let you know

cbowery76

Member - Posts: 8

Joined: May 28, 2003

Posted: June 09, 2003 at 4:01 PM / IP Logged

I don't think it's the self arming feature since I have that disabled and it's not supposed to arm until 30 seconds after circuits have been closed. It arms itself from the turn of the ignition to off. It only does it every 10 times or so. Do I need a diode? I'm lost.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Black Widow Alarm Problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.