2007 Chevrolet Aveo Disarm/Lock/Unlock Wire

Home / the12volt's Install Bay / Car Security and Convenience / 2007 Chevrolet Aveo Disarm/Lock/Unlock Wire

Welcome Guest :)

Members

< Prev Topic Next Topic >

sand33p_sidhu

Member - Posts: 25

Joined: January 19, 2017

Location: Manitoba, Canada

Posted: August 20, 2019 at 12:00 AM / IP Logged

Greetings,

I have installed a remote start using CM900 Compustar module and I have been having hard time finding lock, unlock & disarm wire. According to bulldog security wiring diagram, lock & unlock wires are supposed to be in driver's kick harness but had no luck, disarm wire is supposed to be in driver's door harness, its not there.

According to some of the other wiring diagrams, lock & unlock wire is supposed to be on the pass. kick panel and I don't see anything.

Anyone got any idea? I just want to disarm the alarm when the car starts, I would be okay without the lock & unlock. Any other idea of disarming the alarm when remote start starts the car?

Any help is appreciated!

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 20, 2019 at 10:23 AM / IP Logged

Power Lock lt. blue - driver kick, white 20 pin plug, pin 8

Power Unlock white - driver kick, white 20 pin plug, pin 9

Lock Motor gray 5 wire driver kick, white 20 pin plug, pin 1

Driver Unlock Motor brown 5 wire driver kick, white 20 pin plug, pin 2

Passenger Unlock Motor no progressive unlock

Factory Alarm Arm factory remote only

Factory Alarm Disarm lt. grn/red or brn/blk to pur (dr door key unlock) - driver kick, white 20 pin plug, pin 12

sand33p_sidhu

Member - Posts: 25

Joined: January 19, 2017

Location: Manitoba, Canada

Posted: August 20, 2019 at 12:09 PM / IP Logged

Thank You for the information.

Do you know if i would need to use any relays to make lock & unlock work? According to bulldog security, it says it is a Type B lock & unlock.

i am an idiot

Platinum - Posts: 13,674

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 20, 2019 at 4:15 PM / IP Logged

No relays needed. Connect your alarm's lock wire to the Lt. Blue mentioned above, and connect alarm's unlock wire to the white mentioned above.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.