the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2015 Range Rover Evoque, Remote Start Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
shawzie26 
Member - Posts: 14
Member spacespace
Joined: September†09, 2019
Location: Alberta, Canada
Posted: September†09, 2019 at 8:17 PM / IP Logged Link to Post Post Reply Quote shawzie26
Hey, I would like to install a remote start into my car but cannot find a wiring diagram? Any help would be appreciated! Thank you!
shawzie26 
Member - Posts: 14
Member spacespace
Joined: September†09, 2019
Location: Alberta, Canada
Posted: September†11, 2019 at 6:17 PM / IP Logged Link to Post Post Reply Quote shawzie26
Anybody? lol
eguru 
Copper - Posts: 340
Copper spacespace
Joined: February†04, 2018
Location: Quebec, Canada
Posted: September†11, 2019 at 6:48 PM / IP Logged Link to Post Post Reply Quote eguru
I suspect that hardly anybody who is buying $80K or up vehicles is reading this forum.
mgoetz74 
Silver - Posts: 424
Silver spaceThis member consistently provides reliable informationspace
Joined: February†15, 2012
Location: United States
Posted: September†12, 2019 at 10:04 AM / IP Logged Link to Post Post Reply Quote mgoetz74
i haven't seen a remote start for a range rover since 2012-2013. They don't have conventional ignition systems anymore and the immobilizer is done all through the data system. Probably just out luck on those
might try-
http://roverelectronics.com/
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
shawzie26 
Member - Posts: 14
Member spacespace
Joined: September†09, 2019
Location: Alberta, Canada
Posted: September†12, 2019 at 10:38 AM / IP Logged Link to Post Post Reply Quote shawzie26
Thanks for your reply, my local dealership wants $2200 and the local installer wants $1300, they both say I lose a key so Iím guessing they just use that as the immobilized bypass, I believe i know how to make that work and still have security features I just need the wiring schematic to make life easier lol.
mgoetz74 
Silver - Posts: 424
Silver spaceThis member consistently provides reliable informationspace
Joined: February†15, 2012
Location: United States
Posted: September†12, 2019 at 10:49 AM / IP Logged Link to Post Post Reply Quote mgoetz74
i guarantee you'll loose a key. The car works through data, even the ignitions/accessories/starters are all labeled as "sense only". As a installer we can't go those wires to even add a radar detector
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
shawzie26 
Member - Posts: 14
Member spacespace
Joined: September†09, 2019
Location: Alberta, Canada
Posted: September†12, 2019 at 5:59 PM / IP Logged Link to Post Post Reply Quote shawzie26
Sorry for my ignorance but when you say ďsense onlyĒ do you mean a dry contact? As in no voltage just a switch?
shawzie26 
Member - Posts: 14
Member spacespace
Joined: September†09, 2019
Location: Alberta, Canada
Posted: September†23, 2019 at 7:05 PM / IP Logged Link to Post Post Reply Quote shawzie26
$20 PayPal to anyone that can get me the info I need lol
shawzie26 
Member - Posts: 14
Member spacespace
Joined: September†09, 2019
Location: Alberta, Canada
Posted: October†31, 2019 at 7:27 PM / IP Logged Link to Post Post Reply Quote shawzie26
Well after buying the service manual online, wire mapping and bench testing for 2 days I think itíll work lol, Iím installing a viper 4806 on Saturday, if everything works out Iíll share my findings and what I had to do/use. Iím into this for about $200 Canadian so thatís pretty reasonable plus my time but I enjoy figuring stuff out lol
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March†08, 2002
Location: Manitoba, Canada
Posted: November†01, 2019 at 7:53 AM / IP Logged Link to Post Post Reply Quote Velocity Motors
You can do it with basic relays along with your RS module but as mentioned before, you have to give up a key regardless. You will also need a battery bladder for the CR2032 battery inside the remote FOB and hook this up to the (-) status output wire on the starter.
Here is the battery bladder: https://fortin.ca/en/products/accessories/inset/
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Page of 3

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, March 29, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer