Python Window Roll Up Aux - Relay or Module?

Home / the12volt's Install Bay / Car Security and Convenience / Python Window Roll Up Aux - Relay or Module?

Welcome Guest :)

Members

< Prev Topic Next Topic >

mckee1710

Member - Posts: 10

Joined: October 17, 2019

Location: Florida, United States

Posted: October 21, 2019 at 7:15 PM / IP Logged

Researching to install Python 413 remote start/keyless entry on my 97 Chevy K1500. Would like to utilize the aux/trunk latch to roll my windows up, as I often leave them cracked. The aux is the typical low amp negative output that lasts for the duration of the transmission, per the install sheet. Can I just wire this to two SPST relays on each of the window up wires between the switch and the window motors? Or do I need to use a dedicated window module like the DEI 529T?

iskidoo

Silver - Posts: 1,040

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: October 22, 2019 at 8:10 AM / IP Logged

Most recommend the module for the limiter circuit that is built in.

https://www.the12volt.com/installbay/forum_posts.asp?tid=22460

Steve G

mckee1710

Member - Posts: 10

Joined: October 17, 2019

Location: Florida, United States

Posted: October 22, 2019 at 11:18 AM / IP Logged

Makes sense, thanks!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.