the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

ProStart CT-4211TW, 2003 Chevrolet Duramax


Post ReplyPost New Topic
< Prev Topic Next Topic >
jduche 
Member - Posts: 1
Member spacespace
Joined: December 27, 2019
Location: Alberta, Canada
Posted: December 28, 2019 at 5:36 PM / IP Logged Link to Post Post Reply Quote jduche
Good day gents,
I am installing a ProStart CT-4211TW in my 2003 Duramax along with the DBALL2 and I am in need of a little help. I am wanting to have the ability to idle up my truck and also have my heated seats come on for them cold Canadian winter days.
Being that my truck is an LB7 Duramax, it does not have auto high-idle like the LLY's and newer models so therefore I have wired in a manual high-idle that is activated by my cruise control. I followed the Merchant Automotive installation guide but the short and skinny of how it works is the high-idle is activated by turning cruise control "ON" then pressing "SET" for medium idle (1200 rpm) or "RESUME" for high idle (1800 rpm). What I would like is to be able to turn on the medium idle setting after a few minutes of it running for quicker warm ups via the trunk release or aux buttons.
As for my heated seats, reading through the DBALL2 install guide it states there is a feature to have the heated seats on automatically at preset temperatures but I am wondering if these trucks are compatible with this feature or not.
Thanks for the help guys.
Justin
ProStart CT-4211TW
DBALL2
Merchant Automotive High Idle
cpalmer 
Copper - Posts: 109
Copper spacespace
Joined: March 18, 2007
Location: United States
Posted: December 30, 2019 at 4:55 AM / IP Logged Link to Post Post Reply Quote cpalmer
According to the guide your right on the heated seats, it should activate the heated seats. As far as the High/med. idle mode I would take a look at a timer like the TR7 from pac audio. You can set the TR7 so that when it sees a ground signal it will wait, say 30 seconds and then send an output signal. So the TR7 trigger input to the ground while running output from remote start, then that ouput to the cruise control "set" trigger. This may take some testing to get operation to work properly.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer