2016 Honda CR-V, PTS, Fortin EVO-One

Home / the12volt's Install Bay / Car Security and Convenience / 2016 Honda CR-V, PTS, Fortin EVO-One

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mcgrathe

Member - Posts: 15

Joined: March 22, 2019

Location: Virginia, United States

Posted: April 06, 2020 at 8:33 PM / IP Logged

i have a 16 CRV EXL I installed a Fortin EVO-One with a Thar-One-Hon3 T harness. i have it wired with guide from fortin. Bypass programmed and decryption set. When i do a 3 X lock on OEM fob it starts but alarm goes off. I talked to their tech assistance and set the functions as they recommended but still sets off alarm. If i pull horn fuse its fine far as starting and running duration of course but not correct. Any ideas? About had it with this company. Wish id of went with the Idatalink system like i did in my 15 pilot. Anybody have same issues?

Thanks

Eric M

Back to Top

lectricguy

Copper - Posts: 359

Joined: March 18, 2008

Location: Rhode Island, United States

Posted: April 07, 2020 at 12:07 PM / IP Logged

Did you configure your evo one to unlock before remote start?

From the evo one install guide: Some vehicles must be UNLOCKED to disarm the OEM alarm before remote start. Enable option D2 using the FlashLink Manager. When this option is enabled the module will automatically UNLOCK before remote start and LOCK after the vehicle has remote started.

Have you confirmed your doors unlock before remote start (i.e, do you hear them cycle when you initiate a remote start)?

Lectric Guy

Back to Top

mcgrathe

Member - Posts: 15

Joined: March 22, 2019

Location: Virginia, United States

Posted: April 07, 2020 at 4:37 PM / IP Logged

yeah i have that option set and they unlock. day 2 i tried their support # ill have to try a few more settings i guess. or send back and get Idatalink. Fortin is a horrible company

thanks

Eric M

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.