the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Want to Add 2nd Light Activated by Door Switch


Post ReplyPost New Topic
< Prev Topic Next Topic >
bocajoe 
Member - Posts: 1
Member spacespace
Joined: April 21, 2020
Location: Florida, United States
Posted: April 23, 2020 at 10:49 AM / IP Logged Link to Post Post Reply Quote bocajoe
I am looking to add a 2nd LED Light in my rear cargo area that is activated by the tailgate switch pictured below. The tailgate switch looks to be a single wire.
Can I tap the wire from the tailgate switch to the new LED lights power wire and permanately ground the LED ground wire so the new LED light will come on when tailgate opens?
Vehicle is a 2004 Honda CRV LX.
Want to Add 2nd Light Activated by Door Switch -- posted image.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 9, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer