2011 Toyota Sienna, Avital 4103 and FLCAN

Home / the12volt's Install Bay / Car Security and Convenience / 2011 Toyota Sienna, Avital 4103 and FLCAN

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

redciv1

Member - Posts: 9

Joined: December 29, 2017

Location: Georgia, United States

Posted: August 04, 2020 at 8:51 PM / IP Logged

Our 2012 Sienna base was totalled in June. Found a 2011 LE to replace the totalled van. I installed the Avital 4103 remote start on the 2012 van with no problems 3 years ago. I pulled the remote start system from the old van. It was a base model with no G key.

I went to install the same remote starter on the new van and realized it has a G key with Immobilizer. So I purchased the FLCAN from Flash Logic and uploaded the correct program and the van is doing the same thing as before. It will attempt to start for 6 seconds and then shut down. If I put the key on the of ignition (not turned, just inserted into the slot, then the van starts. Seems like its just Key Sense. Anyone with information?

It's for me!!!

Back to Top

silvercivicsir

Copper - Posts: 403

Joined: November 21, 2003

Posted: August 04, 2020 at 11:09 PM / IP Logged

did you program the FLCAN ? when the van attempts to remote start, does the led on the flcan come on? did you program it for DBI mode?

Back to Top

Search for other posts by silvercivicsir

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.