spacer spacer spacer spacer

AFI Marinco Wipers Park Operation

Post ReplyPost New Topic
< Prev Topic Next Topic >
Copper - Posts: 85
Copper spacespace
Joined: February 13, 2016
Location: Singapore
Posted: August 19, 2020 at 7:11 PM / IP Logged Link to Post Post Reply Quote itolond
Hi Forum,
I have a custom build and need to understand wiper park function better to solve my next steps. In short the wiper unit i have in an AFI Marinco wiper motor with 4 wire connectors (Hi sp/Low sp - Earth and const) - lots of reasons for the mod so I need to work within this parameter.
Most wiper motor (car) have a 5 wire which includes a part function (which the AFI Marinco does via const 12vdc)
This issue here is using factory type wiper control units (wiper wash and intermittent) - hoping to use the factory delay etc but unsure if its at all possible?
anyone have any guidance on this

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Wednesday, June 29, 2022 • Copyright © 1999-2022, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer